1. What’s In The Box?
2. Connecting The Orbbec Camera
Using Provided USB-C cable connect your 3D camera to the PC
3. Get Orbbec Viewer Tool
Obtain the corresponding ORBBEC VIEWER tool based on your system and version.
https://github.com/orbbec/OrbbecSDK_v2/releases
4. Launching Orbbec Viewer
4.1 After starting the OrbbecViewer, the following appears.
4.2 Toggle the Depth button to start and preview the depth stream.
4.3 Toggle the Color button to start and preview the color stream and depth stream side by side.
4.4 Toggle the IR buttons to start and preview the IRs stream.
4.5 Toggle the IMU button to start and preview the IMU stream.
4.6 Click “Advanced” to enter the page then Toggle the 2D view display button to start and preview the D2C stream and 3D point cloud side by side.
4.7. The above are relevant operations for Orbbec Viewer version 1.10.16. There may be slight differences in updated versions.The latest software version can be obtained through the following link: Releases · orbbec/OrbbecSDK_v2
Δ CAUTION
1. Follow the instructions carefully when operating the camera. Improper handling may lead to damage to the internal components.
2. Do not drop the camera or expose the camera to mechanical stress.
3. Do not attempt to modify the camera as such modifications may cause permanent damage or performance degradation.
4. The temperature of the camera may rise during long periods of use.
5. Do not touch the lens. Fingerprints on the lens may affect image quality.
6. Keep the product beyond the reach of children or animals to avoid accidents.
7. If the computer does not recognize the camera, verify that the cable meets the power and data transfer requirements, then replug it into the USB port to reconnect.
8. This product is classified as a Class 1 Laser Product under the international standard EN/IEC 60825-1, Edition 3 (2014). Using controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure.
Safety and Handling Instructions:
●Avoid powering on the product if any external damage was observed.
●Do not attempt to open any portion of this product. There are no user serviceable parts.
●Be cautious of invisible laser radiation. Avoid direct exposure to the beam.
●To maintain compliance and safety standards, do not modify or service the product. Unauthorized modifications or servicing could result in emissions surpassing the Class 1 safety level.
●Only update the camera firmware with official releases that match the specific module SKU and revision to ensure proper functionality and safety.
